Page 1 of 3 1 2 3 LastLast
Results 1 to 25 of 58
  1. #1
    Member mpoirier's Avatar
    Join Date
    Jan 2009
    Location
    Western Ma
    Posts
    697
    Rep Power
    115

    Exclamation Speedfreak sweat shirts????????

    i know there was talk of having some made, whatever happened with that?
    1997 Dodge ram 1500 4X4 5spd 5.2., 3in rough country lift, fresh block, center force stage 2 clutch, full magnaflow/hooker exhaust, full msd iginition dual headed turbo city intake, soon to have a hughes air gap intake, and bored throttle body, 24 FMS injectors and SCT tuning, and a new flywheel perhaps s.s fuel lines if the budget allows

  2. #2
    Angry Midget apstang50's Avatar
    Join Date
    Mar 2009
    Location
    West Yarmouth, Massachusetts, United States
    Posts
    2,744
    Rep Power
    153
    I'd be down for paying for one!
    98 Platimum GC 5.9 Limited Flowmaster, relocated intake temp sensor, clear corners, 35% front tint, 5% sunroof tint, white face gauges, Accel coil, Summit Racing 8MM wires, 100w fog lights w/new housings, Mopar tow hooks, Mopar Performance PCM, Summit Racing drilled/slotted rotors w/ EBC pads, K&N FIPK

    SOLD 90 Mustang LX notchback: cobra intake, 70mm TB and spacer, fender mounted CAI, 1 3/4" long tube headers, 2 1/2" offroad h-pipe, 2 chamber flowmasters, 3.73s, subframe connecters, cobra r glass hood, glass decklid, 5-spd, cobra rims, underdrive pullys, e-fan, Steeda short through shifter


  3. #3
    Chris Jeep98ZJ's Avatar
    Join Date
    Oct 2009
    Location
    Long Island NY
    Posts
    3,022
    Rep Power
    139
    Im down! Gota be a pull over hoodie!
    Platinum 5.9 167K when i bought her. 2.25" engine pipes 3" Magnaflow cat, 3" Hooker Aerochamber, 3" tail pipe, Ported kegger, 52MM Throttle Body, 24lb ford injectors, K&N drop in filter, Cast JEEP valve covers, MSD coil and wires, All new 6 piece clear light kit, 255/65/16 General Grabber HTS, 242 conversion, XJ u-joint front axle shafts

    96 Dodge Ram 1500, 5.2, picked up 12/3/13, 191K miles, edelbrock air cleaner, dual catback exhaust, headers, 50MM TB, 26,000 GVW tranny cooler, 4" lift, 35" General Grabber AT2 tires on Mickey Thompson Classic wheels.

  4. #4
    Angry Midget apstang50's Avatar
    Join Date
    Mar 2009
    Location
    West Yarmouth, Massachusetts, United States
    Posts
    2,744
    Rep Power
    153
    Quote Originally Posted by Jeep98ZJ View Post
    Im down! Gota be a pull over hoodie!
    Kinda thought that went without saying, lol.
    98 Platimum GC 5.9 Limited Flowmaster, relocated intake temp sensor, clear corners, 35% front tint, 5% sunroof tint, white face gauges, Accel coil, Summit Racing 8MM wires, 100w fog lights w/new housings, Mopar tow hooks, Mopar Performance PCM, Summit Racing drilled/slotted rotors w/ EBC pads, K&N FIPK

    SOLD 90 Mustang LX notchback: cobra intake, 70mm TB and spacer, fender mounted CAI, 1 3/4" long tube headers, 2 1/2" offroad h-pipe, 2 chamber flowmasters, 3.73s, subframe connecters, cobra r glass hood, glass decklid, 5-spd, cobra rims, underdrive pullys, e-fan, Steeda short through shifter


  5. #5
    Chris Jeep98ZJ's Avatar
    Join Date
    Oct 2009
    Location
    Long Island NY
    Posts
    3,022
    Rep Power
    139
    Sweat shirts and hoodies are 2 very different things lol.
    Platinum 5.9 167K when i bought her. 2.25" engine pipes 3" Magnaflow cat, 3" Hooker Aerochamber, 3" tail pipe, Ported kegger, 52MM Throttle Body, 24lb ford injectors, K&N drop in filter, Cast JEEP valve covers, MSD coil and wires, All new 6 piece clear light kit, 255/65/16 General Grabber HTS, 242 conversion, XJ u-joint front axle shafts

    96 Dodge Ram 1500, 5.2, picked up 12/3/13, 191K miles, edelbrock air cleaner, dual catback exhaust, headers, 50MM TB, 26,000 GVW tranny cooler, 4" lift, 35" General Grabber AT2 tires on Mickey Thompson Classic wheels.

  6. #6
    PlumBroke country_boy454's Avatar
    Join Date
    May 2010
    Location
    Mt. Iron MN 10 mins to the Gilbert ohv
    Posts
    513
    Rep Power
    97
    Quote Originally Posted by apstang50 View Post
    I'd be down for paying for one!
    Quote Originally Posted by Jeep98ZJ View Post
    Im down! Gota be a pull over hoodie!
    x2! As long as its my size! I'm a bigger fella, ever heard the song XXL by Keith Anderson?

    [ame]http://www.youtube.com/watch?v=8ypHfRbU16k&feature=related[/ame]

  7. #7
    Forum CONDUCTOR Man Z88Z's Avatar
    Join Date
    Jan 2009
    Location
    near Boston
    Posts
    9,646
    Rep Power
    217380
    WANT!

  8. #8
    Member cowboy63b's Avatar
    Join Date
    Aug 2010
    Location
    Lufkin, TEXAS
    Posts
    1,050
    Rep Power
    2272
    also WANT!

  9. #9
    Member JGC403's Avatar
    Join Date
    Feb 2009
    Location
    Pottstown, PA
    Posts
    2,275
    Rep Power
    130
    I would buy one.
    No replacement for displacement!

    1995 Jeep Grand Cherokee Laredo ZJ
    360 Stroker, 408c.i.


  10. #10
    Member mpoirier's Avatar
    Join Date
    Jan 2009
    Location
    Western Ma
    Posts
    697
    Rep Power
    115
    di anybody ever agree on a logo, i liked ricks skull, with crossed cam shafts and motor sizes below it myself, and its got to be hoodies, preferably black
    1997 Dodge ram 1500 4X4 5spd 5.2., 3in rough country lift, fresh block, center force stage 2 clutch, full magnaflow/hooker exhaust, full msd iginition dual headed turbo city intake, soon to have a hughes air gap intake, and bored throttle body, 24 FMS injectors and SCT tuning, and a new flywheel perhaps s.s fuel lines if the budget allows

  11. #11
    Chris Jeep98ZJ's Avatar
    Join Date
    Oct 2009
    Location
    Long Island NY
    Posts
    3,022
    Rep Power
    139
    ^ agreed

    We gota figure this out soon it's getting cold.
    Platinum 5.9 167K when i bought her. 2.25" engine pipes 3" Magnaflow cat, 3" Hooker Aerochamber, 3" tail pipe, Ported kegger, 52MM Throttle Body, 24lb ford injectors, K&N drop in filter, Cast JEEP valve covers, MSD coil and wires, All new 6 piece clear light kit, 255/65/16 General Grabber HTS, 242 conversion, XJ u-joint front axle shafts

    96 Dodge Ram 1500, 5.2, picked up 12/3/13, 191K miles, edelbrock air cleaner, dual catback exhaust, headers, 50MM TB, 26,000 GVW tranny cooler, 4" lift, 35" General Grabber AT2 tires on Mickey Thompson Classic wheels.

  12. #12
    PlumBroke country_boy454's Avatar
    Join Date
    May 2010
    Location
    Mt. Iron MN 10 mins to the Gilbert ohv
    Posts
    513
    Rep Power
    97
    Quote Originally Posted by Jeep98ZJ View Post
    ^ agreed

    We gota figure this out soon it's getting cold.
    ^ agreed!

    I didn't see any pics or ideas but just reading the description of the one sounds awesome!

  13. #13
    registered user Jeepkid's Avatar
    Join Date
    Jan 2009
    Location
    Puyallup WA
    Posts
    1,873
    Rep Power
    137
    http://thespeedfreaks.net/showthread.php?t=3044

    it kinda just died off.. no one really committed to anything.. i personally dont want something dinky.. id like to have something i could wear around family and friends and not be embarresed..
    2010 Dodge Ram 1500 TRX-4 Hemi, 407lb Tq 390+Hp, Navigation, Back up cam.
    '79 Hydrostream Vector w/ 150HP Mercury Black Max outboard.
    '07 Acura Tsx Navi, Back up cam, Projector headlamps
    '98 <TRADED> 5.9 ZJ 14.77 1/4 mile ,3in FM 40 series, HF Cat,E-Cut-out, Mx6 shocks,20x8.5 Cobra R's 255/45/20 Yokohamas, 5% limo tint,Addco 1.25" military bar front, Hellwig 7/8th bar rear, Regeared to 4.10's, 13" C6 Corvette Brake Kit with Dual piston caliper, Wj Control Arms, Doug Thorley headers, 52mm TB, K&N Intake, boxed rear control arms with prothane bushings, Prothane trans mount, Martin Saines custom trans, Aux trans filter, B&M trans cooler, 242 Case swap, SCT Tuner Via hemifever, JL w6v2 sub, JL speakers, Kenwood amp,8 inch indash dvd

  14. #14
    Chris Jeep98ZJ's Avatar
    Join Date
    Oct 2009
    Location
    Long Island NY
    Posts
    3,022
    Rep Power
    139
    I say go with Rings design just have it say "speedfreaks.net" along the bottom. No JU or anything like that. Nice black hoodies with that on the back in white. Maybe JEEP in small letters over the breast? We gota figure this out asap i want one lol.
    Platinum 5.9 167K when i bought her. 2.25" engine pipes 3" Magnaflow cat, 3" Hooker Aerochamber, 3" tail pipe, Ported kegger, 52MM Throttle Body, 24lb ford injectors, K&N drop in filter, Cast JEEP valve covers, MSD coil and wires, All new 6 piece clear light kit, 255/65/16 General Grabber HTS, 242 conversion, XJ u-joint front axle shafts

    96 Dodge Ram 1500, 5.2, picked up 12/3/13, 191K miles, edelbrock air cleaner, dual catback exhaust, headers, 50MM TB, 26,000 GVW tranny cooler, 4" lift, 35" General Grabber AT2 tires on Mickey Thompson Classic wheels.

  15. #15
    Last Shadow RINGWRAITH's Avatar
    Join Date
    Jan 2009
    Posts
    5,395
    Rep Power
    192
    Quote Originally Posted by Jeep98ZJ View Post
    I say go with Rings design just have it say "speedfreaks.net" along the bottom. No JU or anything like that. Nice black hoodies with that on the back in white. Maybe JEEP in small letters over the breast? We gota figure this out asap i want one lol.
    I could pencil up another design if ya want me to make another attempt????
    Captain of the Nine

  16. #16
    Chris Jeep98ZJ's Avatar
    Join Date
    Oct 2009
    Location
    Long Island NY
    Posts
    3,022
    Rep Power
    139
    hell yea so far that design looks awesome.
    Platinum 5.9 167K when i bought her. 2.25" engine pipes 3" Magnaflow cat, 3" Hooker Aerochamber, 3" tail pipe, Ported kegger, 52MM Throttle Body, 24lb ford injectors, K&N drop in filter, Cast JEEP valve covers, MSD coil and wires, All new 6 piece clear light kit, 255/65/16 General Grabber HTS, 242 conversion, XJ u-joint front axle shafts

    96 Dodge Ram 1500, 5.2, picked up 12/3/13, 191K miles, edelbrock air cleaner, dual catback exhaust, headers, 50MM TB, 26,000 GVW tranny cooler, 4" lift, 35" General Grabber AT2 tires on Mickey Thompson Classic wheels.

  17. #17
    Last Shadow RINGWRAITH's Avatar
    Join Date
    Jan 2009
    Posts
    5,395
    Rep Power
    192
    ok........give me a few dayz.......
    Captain of the Nine

  18. #18
    Chris Jeep98ZJ's Avatar
    Join Date
    Oct 2009
    Location
    Long Island NY
    Posts
    3,022
    Rep Power
    139
    I duno about everyone else but i love the design almost as is. All id have is SPEEDFREAKS.NET get rid of all the other wording. Maybe get JEEP in there somehow? Im sure you can do it!
    Platinum 5.9 167K when i bought her. 2.25" engine pipes 3" Magnaflow cat, 3" Hooker Aerochamber, 3" tail pipe, Ported kegger, 52MM Throttle Body, 24lb ford injectors, K&N drop in filter, Cast JEEP valve covers, MSD coil and wires, All new 6 piece clear light kit, 255/65/16 General Grabber HTS, 242 conversion, XJ u-joint front axle shafts

    96 Dodge Ram 1500, 5.2, picked up 12/3/13, 191K miles, edelbrock air cleaner, dual catback exhaust, headers, 50MM TB, 26,000 GVW tranny cooler, 4" lift, 35" General Grabber AT2 tires on Mickey Thompson Classic wheels.

  19. #19
    Member NW-XJ-SCOTT's Avatar
    Join Date
    Jan 2010
    Location
    PDX
    Posts
    388
    Rep Power
    99
    Quote Originally Posted by Jeep98ZJ View Post
    I duno about everyone else but i love the design almost as is. All id have is SPEEDFREAKS.NET get rid of all the other wording. Maybe get JEEP in there somehow? Im sure you can do it!
    The logo at the top of this page on the left would be great for the front, and the three Grand's would be great on the back..
    Coming soon.. 35s

  20. #20
    Chris Jeep98ZJ's Avatar
    Join Date
    Oct 2009
    Location
    Long Island NY
    Posts
    3,022
    Rep Power
    139
    ^ BOOOOOOOOOOORIIIIIIIIIIIIIIIING^
    Platinum 5.9 167K when i bought her. 2.25" engine pipes 3" Magnaflow cat, 3" Hooker Aerochamber, 3" tail pipe, Ported kegger, 52MM Throttle Body, 24lb ford injectors, K&N drop in filter, Cast JEEP valve covers, MSD coil and wires, All new 6 piece clear light kit, 255/65/16 General Grabber HTS, 242 conversion, XJ u-joint front axle shafts

    96 Dodge Ram 1500, 5.2, picked up 12/3/13, 191K miles, edelbrock air cleaner, dual catback exhaust, headers, 50MM TB, 26,000 GVW tranny cooler, 4" lift, 35" General Grabber AT2 tires on Mickey Thompson Classic wheels.

  21. #21
    Member NW-XJ-SCOTT's Avatar
    Join Date
    Jan 2010
    Location
    PDX
    Posts
    388
    Rep Power
    99
    Quote Originally Posted by Jeep98ZJ View Post
    ^ BOOOOOOOOOOORIIIIIIIIIIIIIIIING^

    You need this on a shirt
    Coming soon.. 35s

  22. #22
    PlumBroke country_boy454's Avatar
    Join Date
    May 2010
    Location
    Mt. Iron MN 10 mins to the Gilbert ohv
    Posts
    513
    Rep Power
    97
    Quote Originally Posted by NW-XJ-SCOTT View Post
    The logo at the top of this page on the left would be great for the front, and the three Grand's would be great on the back..
    That is a simple yet effective design. Could also have the option of having your username under the logo in front maybe?

  23. #23
    Chris Jeep98ZJ's Avatar
    Join Date
    Oct 2009
    Location
    Long Island NY
    Posts
    3,022
    Rep Power
    139
    lol i should own that shirt. Just like the one i DO own that says "im multitalented, i can walk and piss you off at the same time"
    Platinum 5.9 167K when i bought her. 2.25" engine pipes 3" Magnaflow cat, 3" Hooker Aerochamber, 3" tail pipe, Ported kegger, 52MM Throttle Body, 24lb ford injectors, K&N drop in filter, Cast JEEP valve covers, MSD coil and wires, All new 6 piece clear light kit, 255/65/16 General Grabber HTS, 242 conversion, XJ u-joint front axle shafts

    96 Dodge Ram 1500, 5.2, picked up 12/3/13, 191K miles, edelbrock air cleaner, dual catback exhaust, headers, 50MM TB, 26,000 GVW tranny cooler, 4" lift, 35" General Grabber AT2 tires on Mickey Thompson Classic wheels.

  24. #24
    registered user Jeepkid's Avatar
    Join Date
    Jan 2009
    Location
    Puyallup WA
    Posts
    1,873
    Rep Power
    137
    Quote Originally Posted by NW-XJ-SCOTT View Post
    The logo at the top of this page on the left would be great for the front, and the three Grand's would be great on the back..
    Thats actually a really good idea.. the words embroidered on the front of a sweater or jacket and the jeeps on the back..
    2010 Dodge Ram 1500 TRX-4 Hemi, 407lb Tq 390+Hp, Navigation, Back up cam.
    '79 Hydrostream Vector w/ 150HP Mercury Black Max outboard.
    '07 Acura Tsx Navi, Back up cam, Projector headlamps
    '98 <TRADED> 5.9 ZJ 14.77 1/4 mile ,3in FM 40 series, HF Cat,E-Cut-out, Mx6 shocks,20x8.5 Cobra R's 255/45/20 Yokohamas, 5% limo tint,Addco 1.25" military bar front, Hellwig 7/8th bar rear, Regeared to 4.10's, 13" C6 Corvette Brake Kit with Dual piston caliper, Wj Control Arms, Doug Thorley headers, 52mm TB, K&N Intake, boxed rear control arms with prothane bushings, Prothane trans mount, Martin Saines custom trans, Aux trans filter, B&M trans cooler, 242 Case swap, SCT Tuner Via hemifever, JL w6v2 sub, JL speakers, Kenwood amp,8 inch indash dvd

  25. #25
    Junior Member jeepkid59's Avatar
    Join Date
    Feb 2009
    Location
    Waynesville, NC
    Posts
    4
    Rep Power
    0
    I'm down to buy one
    1998 Jeep Grand Cherokee 5.9 Ltd. K&N intake and custom FM exhaust. Motor is being built as we speak and body is being painted two-tone SRT8 Black on bottom and SRT8 silver on top

Similar Threads

  1. New SpeedFreak from NC
    By infernoaudio in forum Member Gallery
    Replies: 2
    Last Post: 09-07-2012, 12:10 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •