Results 1 to 5 of 5

Thread: tm snip issues

  1. #1
    Member Mark 318 ita's Avatar
    Join Date
    Nov 2012
    Location
    Desenzano (bs), Italy
    Posts
    1,616
    Rep Power
    102

    tm snip issues

    Hey guys,
    a friend of mine has a 98 wj canada export (i know, it's a rare rig....don't tell me it can't be lol ), and he just did the tm snip mod.
    tranny is a 45 not a 545.


    issue is: during the first 4-5 shifts it shifts properly at around 5500 rpms and it shifts hard!
    after a cuople of launches it starts shifting early at 4000 and won't go over it.
    also won't kick down right.
    if he turns off the car and then it turns it back on , the tranny starts shifting properly again.


    any ideas?


    thanks
    98 ZG 318 limited: np 242 swap,dana30hp swap,aussie locker, shift kit, optima red, 170lbs reduction, 5.9 vents, kn air filter, air ram, 1.7 HS RRs, SCT 93 oct tune, magnaflow muffler 12255, magnaflow hi-flo cat, spectre air hat, 2x52mm tb, 5.9 efan swap, ngk fr5-1 plugs, mopar perf wires, new cap 'n rot, maxxperf coil, iat relocation, roof lights, pirelli scorpions on masitaly 16x7 rims ET=0, ome HD coils +2",rubic exp +2"shocks, skyjacker ss, rubic exp adjustable front arms, jks rear+procomp front trackbar, prothane engine n tranny mounts, prothane sway bars bushings, drilled n slotted rotors, aeronautical front brake lines, purple led into front grill, hella h4s 100/55w, osarm h3s 55w.
    my channel
    https://www.youtube.com/TommyVercettism/videos

  2. #2
    Member scjeep4.7HO's Avatar
    Join Date
    Jan 2009
    Posts
    1,105
    Rep Power
    132
    I wonder if he has a solenoid acting up.
    Big ASS supercharged 4.7L HO, cammed, Custom Made Supercharger COG drive system, 72mm F&B throttle body, ROSS ceramic coated pistons, Billet H beam rods, 1st set of race prepped big valves heads W/ behive springs, Custom one off sheet metal intake, Modified Edelbrock Mustang intake elbow, ATI super dampner, 3,000 Edge racing billet stall converter, meth injected, SCT tuned, 39# injectors, 2 bar map, Turbo Smart Race Port BOV, 180* T stat, True dual exhuast, Built tranny W/ deep trans pan, built transfer case, 275 60 R17 rubber.

  3. #3
    Member Mark 318 ita's Avatar
    Join Date
    Nov 2012
    Location
    Desenzano (bs), Italy
    Posts
    1,616
    Rep Power
    102
    How do We check them?
    98 ZG 318 limited: np 242 swap,dana30hp swap,aussie locker, shift kit, optima red, 170lbs reduction, 5.9 vents, kn air filter, air ram, 1.7 HS RRs, SCT 93 oct tune, magnaflow muffler 12255, magnaflow hi-flo cat, spectre air hat, 2x52mm tb, 5.9 efan swap, ngk fr5-1 plugs, mopar perf wires, new cap 'n rot, maxxperf coil, iat relocation, roof lights, pirelli scorpions on masitaly 16x7 rims ET=0, ome HD coils +2",rubic exp +2"shocks, skyjacker ss, rubic exp adjustable front arms, jks rear+procomp front trackbar, prothane engine n tranny mounts, prothane sway bars bushings, drilled n slotted rotors, aeronautical front brake lines, purple led into front grill, hella h4s 100/55w, osarm h3s 55w.
    my channel
    https://www.youtube.com/TommyVercettism/videos

  4. #4
    Member scjeep4.7HO's Avatar
    Join Date
    Jan 2009
    Posts
    1,105
    Rep Power
    132
    I'm not sure. Might be able to see with a good scan tool. Are there any codes? When has the trans fluid and filter been changed last
    Big ASS supercharged 4.7L HO, cammed, Custom Made Supercharger COG drive system, 72mm F&B throttle body, ROSS ceramic coated pistons, Billet H beam rods, 1st set of race prepped big valves heads W/ behive springs, Custom one off sheet metal intake, Modified Edelbrock Mustang intake elbow, ATI super dampner, 3,000 Edge racing billet stall converter, meth injected, SCT tuned, 39# injectors, 2 bar map, Turbo Smart Race Port BOV, 180* T stat, True dual exhuast, Built tranny W/ deep trans pan, built transfer case, 275 60 R17 rubber.

  5. #5
    Member Mark 318 ita's Avatar
    Join Date
    Nov 2012
    Location
    Desenzano (bs), Italy
    Posts
    1,616
    Rep Power
    102
    i don't think there are any codes,
    we'll check it out though.
    fluid and filters are pretty new, 5000miles top.
    thanks
    98 ZG 318 limited: np 242 swap,dana30hp swap,aussie locker, shift kit, optima red, 170lbs reduction, 5.9 vents, kn air filter, air ram, 1.7 HS RRs, SCT 93 oct tune, magnaflow muffler 12255, magnaflow hi-flo cat, spectre air hat, 2x52mm tb, 5.9 efan swap, ngk fr5-1 plugs, mopar perf wires, new cap 'n rot, maxxperf coil, iat relocation, roof lights, pirelli scorpions on masitaly 16x7 rims ET=0, ome HD coils +2",rubic exp +2"shocks, skyjacker ss, rubic exp adjustable front arms, jks rear+procomp front trackbar, prothane engine n tranny mounts, prothane sway bars bushings, drilled n slotted rotors, aeronautical front brake lines, purple led into front grill, hella h4s 100/55w, osarm h3s 55w.
    my channel
    https://www.youtube.com/TommyVercettism/videos

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •