Results 1 to 7 of 7
  1. #1
    Member Mark 318 ita's Avatar
    Join Date
    Nov 2012
    Location
    Desenzano (bs), Italy
    Posts
    1,607
    Rep Power
    101

    front spoiler under the bumper

    Hey guys,
    i'd like to do some kind of a chin spoiler for my zj, i was looking at this
    http://thespeedfreaks.net/showthread...oiler-for-a-ZJ

    do you have any data for it? lenght? angles?

    thanks
    98 ZG 318 limited: np 242 swap,dana30hp swap,aussie locker, shift kit, optima red, 170lbs reduction, 5.9 vents, kn air filter, air ram, 1.7 HS RRs, SCT 93 oct tune, magnaflow muffler 12255, magnaflow hi-flo cat, spectre air hat, 2x52mm tb, 5.9 efan swap, ngk fr5-1 plugs, mopar perf wires, new cap 'n rot, maxxperf coil, iat relocation, roof lights, pirelli scorpions on masitaly 16x7 rims ET=0, ome HD coils +2",rubic exp +2"shocks, skyjacker ss, rubic exp adjustable front arms, jks rear+procomp front trackbar, prothane engine n tranny mounts, prothane sway bars bushings, drilled n slotted rotors, aeronautical front brake lines, purple led into front grill, hella h4s 100/55w, osarm h3s 55w.
    my channel
    https://www.youtube.com/TommyVercettism/videos

  2. #2
    Member
    Join Date
    Nov 2014
    Location
    Seattle
    Posts
    717
    Rep Power
    45
    Somebody on here used a front ZJ bumper with most of the upper bumper cut off, flipped upside down, so the mounting holes line up perfectly with the bottom of the existing bumper. I'm thinking of just adding a splitter to mine after the motor's done.

  3. #3
    moderator
    Join Date
    Jul 2010
    Location
    Mazatlan, Mexico
    Posts
    3,258
    Rep Power
    217224
    Quote Originally Posted by carlmon View Post
    Somebody on here used a front ZJ bumper with most of the upper bumper cut off, flipped upside down, so the mounting holes line up perfectly with the bottom of the existing bumper. I'm thinking of just adding a splitter to mine after the motor's done.
    I believe it was Roger Berkan.

  4. #4
    Member Mark 318 ita's Avatar
    Join Date
    Nov 2012
    Location
    Desenzano (bs), Italy
    Posts
    1,607
    Rep Power
    101
    would be interesting to take a look at it, but i can't find it...
    98 ZG 318 limited: np 242 swap,dana30hp swap,aussie locker, shift kit, optima red, 170lbs reduction, 5.9 vents, kn air filter, air ram, 1.7 HS RRs, SCT 93 oct tune, magnaflow muffler 12255, magnaflow hi-flo cat, spectre air hat, 2x52mm tb, 5.9 efan swap, ngk fr5-1 plugs, mopar perf wires, new cap 'n rot, maxxperf coil, iat relocation, roof lights, pirelli scorpions on masitaly 16x7 rims ET=0, ome HD coils +2",rubic exp +2"shocks, skyjacker ss, rubic exp adjustable front arms, jks rear+procomp front trackbar, prothane engine n tranny mounts, prothane sway bars bushings, drilled n slotted rotors, aeronautical front brake lines, purple led into front grill, hella h4s 100/55w, osarm h3s 55w.
    my channel
    https://www.youtube.com/TommyVercettism/videos

  5. #5
    Forum CONDUCTOR Man Z88Z's Avatar
    Join Date
    Jan 2009
    Location
    near Boston
    Posts
    9,647
    Rep Power
    217380
    Quote Originally Posted by MexiJeeper View Post
    I believe it was Roger Berkan.
    Quote Originally Posted by Mark 318 ita View Post
    would be interesting to take a look at it, but i can't find it...

    When I saw this that was what I was thinking of but couldn't remember - thank you Tony!

    And here you go Mark: http://thespeedfreaks.net/showthread...-Front-Spoiler


    All about personal taste but I think these all look pretty good.

    Thinking the ZJ part might be a bit easier to find? I'm guessing the Ford Ranger one from the other thread wouldn't be all that easy to source over there Mark, but I think Rick/Ringwraith mentioned a Blazer part. Many of those over there?

  6. #6
    Member Mark 318 ita's Avatar
    Join Date
    Nov 2012
    Location
    Desenzano (bs), Italy
    Posts
    1,607
    Rep Power
    101
    thanks a lot!
    that looks so damn good!


    ...no blazers here though
    98 ZG 318 limited: np 242 swap,dana30hp swap,aussie locker, shift kit, optima red, 170lbs reduction, 5.9 vents, kn air filter, air ram, 1.7 HS RRs, SCT 93 oct tune, magnaflow muffler 12255, magnaflow hi-flo cat, spectre air hat, 2x52mm tb, 5.9 efan swap, ngk fr5-1 plugs, mopar perf wires, new cap 'n rot, maxxperf coil, iat relocation, roof lights, pirelli scorpions on masitaly 16x7 rims ET=0, ome HD coils +2",rubic exp +2"shocks, skyjacker ss, rubic exp adjustable front arms, jks rear+procomp front trackbar, prothane engine n tranny mounts, prothane sway bars bushings, drilled n slotted rotors, aeronautical front brake lines, purple led into front grill, hella h4s 100/55w, osarm h3s 55w.
    my channel
    https://www.youtube.com/TommyVercettism/videos

  7. #7
    Member Mark 318 ita's Avatar
    Join Date
    Nov 2012
    Location
    Desenzano (bs), Italy
    Posts
    1,607
    Rep Power
    101
    Just bought the bumper!!
    Attached Images Attached Images
    98 ZG 318 limited: np 242 swap,dana30hp swap,aussie locker, shift kit, optima red, 170lbs reduction, 5.9 vents, kn air filter, air ram, 1.7 HS RRs, SCT 93 oct tune, magnaflow muffler 12255, magnaflow hi-flo cat, spectre air hat, 2x52mm tb, 5.9 efan swap, ngk fr5-1 plugs, mopar perf wires, new cap 'n rot, maxxperf coil, iat relocation, roof lights, pirelli scorpions on masitaly 16x7 rims ET=0, ome HD coils +2",rubic exp +2"shocks, skyjacker ss, rubic exp adjustable front arms, jks rear+procomp front trackbar, prothane engine n tranny mounts, prothane sway bars bushings, drilled n slotted rotors, aeronautical front brake lines, purple led into front grill, hella h4s 100/55w, osarm h3s 55w.
    my channel
    https://www.youtube.com/TommyVercettism/videos

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •